-- Leo's gemini proxy
-- Connecting to www-gem.flounder.online:1965...
-- Connected
-- Sending request
-- Meta line: 20 text/gemini; charset=utf-8
░█░█░█░█░█▀█░▀█▀░░░█░█░█▀█░█▀▀░░░█░█░█▀▄░█▀█░█▀█░█▀▀ ░█▄█░█▀█░█▀█░░█░░░░█▄█░█▀█░▀▀█░░░█▄█░█▀▄░█░█░█░█░█░█ ░▀░▀░▀░▀░▀░▀░░▀░░░░▀░▀░▀░▀░▀▀▀░░░▀░▀░▀░▀░▀▀▀░▀░▀░▀▀▀
================================================================
20 April 2021
In a terminal, type bluetoothctl then power on. Do you get a message like "no default controller available" ?
If no, the way to use the bluetooth is:
- execute bluetoothctl
- then type power on
- scan on
- pair MAC_OF_DEVICE
- if using a device without a PIN, one may need to manually trust the device before it can reconnect successfully. To do so, type trust MAC_OF_DEVICE
- connect MAC_OF_DEVICE
If yes, here are some things you can try:
- make sure your system and all packages are up to date
- make sure your bluetooth firmware is installed
- make sure the bluetooth module is loaded (run rmmod btusb then modprobe btusb)
- check that there is no options preventing your bluetooth to be activated in your Bios
- check that your bluetooth is not blocked by rfkill
- in Archlinux, using the deprecated bluez-utils-compat in lieu of bluez-utils can help in some situations
- try adding the kernel parameter btusb.enable_autosuspend=n
-- Response ended
-- Page fetched on Sun May 19 22:52:59 2024