Routing a specific user on a specific network interface on Linux

Author: Solène

Date: 23 April 2022

Tags: linux networking security

Comment on Mastodon

Introduction

I have a special network need on Linux, I must have a single user going through specific VPN tunnel. This can't be done using a different metric for the VPN or by telling the program to bind on a specific interface.

How does it work

The setup is easy once you find how to proceed on Linux: we define a new routing table named 42 and add a rule assigning user with uid 1002 to this routing table. It's important to declare the VPN default route on the exact same table to make it work.

#!/bin/sh

REMOTEGW=YOUR_VPN_REMOTE_GATEWAY_IP
LOCALIP=YOUR_VPN_LOCAL_IP
INTERFACE=tun0

ip route add table 42 $REMOTEGW dev tun0
ip route add table 42 default via $REMOTEGW dev tun0 src $LOCALIP
ip rule add pref 500 uidrange 1002-1002 lookup 42
ip rule add from $LOCALIP  table 42

Conclusion

It's quite complicated to achieve this on Linux because there are many ways to proceed like netns (network namespace), iptables or vrf but the routing solution is quite elegant, and the documentation are never obvious for this use case.

I'd like to thank @loweel@bbs.keinpfusch.net from the Fediverse for giving me the first bits about ip rules and using a different route table.

-- Response ended

-- Page fetched on Mon May 6 03:51:45 2024