-- Leo's gemini proxy
-- Connecting to gmi.runtimeterror.dev:1965...
-- Connected
-- Sending request
-- Meta line: 20 text/gemini;lang=en-US
2023-11-25 ~ 2024-01-15
A couple of months ago, I wrote about [1] how I was using a self-hosted instance of ntfy [2] to help streamline notification pushes from a variety of sources. I closed that post with a quick look at how I had integrated ntfy into my Home Assistant setup [3] for some basic notifications.
I've now used that immense power to enhance the notifications I get from the Reolink security cameras [4] scattered around my house. I selected Reolink cameras specifically because I knew it was supported by Home Assistant, and for the on-device animal/person/vehicle detection which allowed for a bit of extra control over which types of motion events would trigger a notification or other action. I've been very happy with this choice, but I have found that the Reolink app itself can be a bit clunky:
The app lets you send notifications on a schedule (I only want notifications from the indoor cameras during work hours when no one is home), but doesn't make it easy to override that schedule (like when it's a holiday and we're all at home anyway).
Push notifications don't include an image capture so when I receive a notification about a person in my backyard I have to open the app, go select the correct camera, select the Playback option, and scrub back and forth until I see whatever my camera saw.
I figured I could combine the excellent Reolink integration for Home Assistant [5] with Home Assistant's powerful Automation platform and ntfy to get more informative notifications and more flexible alert schedules. Here's the route I took.
<-- note -->
Since manually configuring ntfy in Home Assistant via the RESTful Notifications integration [6], I found that a ntfy-specific integration [7] was available through the Home Assistant Community Store [8] addon. That setup is a bit more flexible so I've switched my setup to use it instead:
# configuration.yaml
notify:
- name: ntfy
platform: rest
method: POST_JSON
headers:
Authorization: !secret ntfy_token
data:
topic: home_assistant
title_param_name: title
message_param_name: message
resource: ! secret ntfy_url
platform: ntfy
url: !secret ntfy_url
token: !secret ntfy_token
topic: home_assistant
<-- /note -->
The Reolink integration exposes a number of entities for each camera. For triggering a notification on motion detection, I'll be interested in the binary sensor [9] entities named like `binary_sensor.$location_$type` (like `binary_sensor.backyard_person` and `binary_sensor.driveway_vehicle`), the state of which will transition from `off` to `on` when the selected motion type is detected.
So I'll begin by crafting a simple automation which will push out a notification whenever any of the listed cameras detect a person or vehicle
alias: Exterior Motion Alerts
description: ""
trigger:
- platform: state
entity_id:
- binary_sensor.backyard_person
- binary_sensor.driveway_person
- binary_sensor.driveway_vehicle
- binary_sensor.east_side_front_person
- binary_sensor.east_side_rear_person
- binary_sensor.west_side_person
from: "off"
to: "on"
condition: []
action:
- service: notify.ntfy
data:
title: Motion detected!
message: "{{ trigger.to_state.attributes.friendly_name }}"
<-- note --> That last line is taking advantage of Jinja templating and trigger variables [10] so that the resulting notification displays the friendly name of whichever `binary_sensor` triggered the automation run. This way, I'll see something like "Backyard Person" instead of the entity ID listed earlier. <-- /note --> => https://www.home-assistant.io/docs/automation/templating/#state [10] trigger variables I'll step outside and see if it works... => backyard_person.png Image: backyard person ### Capture a snapshot Each Reolink camera also exposes a `camera.$location_sub` entity which represents the video stream from the connected camera. I can add another action to the notification so that it will grab a snapshot, but I'll also need a way to match the `camera` entity to the correct `binary_sensor` entity. I can do that by adding a variable set to the bottom of the automation:
alias: Exterior Motion Alerts
description: ""
trigger:
- platform: state
entity_id:
- binary_sensor.backyard_person
- binary_sensor.driveway_person
- binary_sensor.driveway_vehicle
- binary_sensor.east_side_front_person
- binary_sensor.east_side_rear_person
- binary_sensor.west_side_person
from: "off"
to: "on"
condition: []
action:
- service: camera.snapshot
target:
entity_id: "{{ cameras[trigger.to_state.entity_id] }}"
data:
filename: /media/snaps/motion.jpg
- service: notify.ntfy
data:
title: Motion detected!
message: "{{ trigger.to_state.attributes.friendly_name }}"
variables:
cameras:
binary_sensor.backyard_person: camera.backyard_sub
binary_sensor.driveway_person: camera.driveway_sub
binary_sensor.driveway_vehicle: camera.driveway_sub
binary_sensor.east_side_front_person: camera.east_side_front_sub
binary_sensor.east_side_rear_person: camera.east_side_rear_sub
binary_sensor.west_side_person: camera.west_side_sub
That `"{{ camerastrigger.to_state.entity_id] }}"` template will look up the ID of the triggering `binary_sensor` and return the appropriate `camera` entity, and that will use the [`camera.snapshot` service [11] to save a snapshot to the desginated location (`/media/snaps/motion.jpg`).
=> https://www.home-assistant.io/integrations/camera/#service-snapshot [11] trigger.to_state.entity_id] }}"` template will look up the ID of the triggering `binary_sensor` and return the appropriate `camera` entity, and that will use the [`camera.snapshot` service
Before this will actually work, though, I need to reconfigure Home Assistant to allow access to the storage location, and I should also go ahead and pre-create the folder so there aren't any access issues.
homeassistant:
allowlist_external_dirs:
- "/media/snaps/"
I'm using the Home Assistant Operating System virtual appliance [12], so `/media` is already symlinked to `/root/media` inside the Home Assistant installation directory. So I'll just log into that shell and create the `snaps` subdirectory: => https://www.home-assistant.io/installation/alternative#install-home-assistant-operating-system [12] Home Assistant Operating System virtual appliance
mkdir -p /media/snaps
Rather than walking outside each time I want to test this, I'll just use the Home Assistant Developer Tools to manually toggle the state of the `binary_sensor.backyard_person` entity to `on`, and I should then be able to see the snapshot in the Media interface:
=> backyard_snap.png Image: backyard snap
Woo, look at me making progress!
### Attach the snapshot
Now that I've captured the snap, I need to figure out how to attach it to the notification. Ntfy supports inline image attachments [13], which is handy, but it expects those to be delivered via HTTP `PUT` action. Neither my original HTTP `POST` approach or the Ntfy integration support this currently, so I had to use the `shell_command` integration [14] to make the call directly.
=> https://docs.ntfy.sh/publish/#attach-local-file [13] supports inline image attachments
=> https://www.home-assistant.io/integrations/shell_command/ [14] `shell_command` integration
I can't use the handy `!secret` expansion inside of the shell command, though, so I'll need a workaround to avoid sticking sensitive details directly in my `configuration.yaml`. I can use a dummy sensor to hold the value, and then use the `{{ states('sensor.$sensor_name') }}` template to retrieve it.
So here we go:
template:
- sensor:
- name: ntfy_token
state: !secret ntfy_token
- name: ntfy_url
state: !secret ntfy_url
notify:
- name: ntfy
platform: ntfy
url: !secret ntfy_url
token: !secret ntfy_token
topic: home_assistant
shell_command:
ntfy_put: >
curl
--header 'Title: {{ title }}'
--header 'Priority: {{ priority }}'
--header 'Filename: {{ filename }}'
--header 'Authorization: Bearer {{ states('sensor.ntfy_token') }}'
--upload-file '{{ file }}'
--header 'Message: {{ message }}'
--url '{{ states('sensor.ntfy_url') }}/home_assistant'
Now I just need to replace the service call in the automation with the new `shell_command.ntfy_put` one:
alias: Exterior Motion Alerts
description: ""
trigger:
- platform: state
entity_id:
- binary_sensor.backyard_person
- binary_sensor.driveway_person
- binary_sensor.driveway_vehicle
- binary_sensor.east_side_front_person
- binary_sensor.east_side_rear_person
- binary_sensor.west_side_person
from: "off"
to: "on"
condition: []
action:
- service: camera.snapshot
target:
entity_id: "{{ cameras[trigger.to_state.entity_id] }}"
data:
filename: /media/snaps/motion.jpg
- service: notify.ntfy
data:
title: Motion detected!
message: "{{ trigger.to_state.attributes.friendly_name }}"
- service: shell_command.ntfy_put
data:
title: Motion detected!
message: "{{ trigger.to_state.attributes.friendly_name }}"
file: /media/snaps/motion.jpg
variables:
cameras:
binary_sensor.backyard_person: camera.backyard_sub
binary_sensor.driveway_person: camera.driveway_sub
binary_sensor.driveway_vehicle: camera.driveway_sub
binary_sensor.east_side_front_person: camera.east_side_front_sub
binary_sensor.east_side_rear_person: camera.east_side_rear_sub
binary_sensor.west_side_person: camera.west_side_sub
Now when I wander outside... => backyard_person_attached.png Image: backyard_person_attached Well that guy seems sus - but hey, it worked! ### Backoff rate limit Of course, I'll also continue to get notified about that creeper in the backyard about every 15-20 seconds or so. That's not quite what I want. The _easy_ way to prevent an automation from firing constantly would be to insert a `delay` [15] action, but that would be a global delay rather than per-camera. I don't necessarily need to know every time the weirdo in the backyard moves, but I would like to know if he moves around to the side yard or driveway. So I needed something more flexible than an automation-wide delay. => https://www.home-assistant.io/docs/scripts/#wait-for-time-to-pass-delay [15] insert a `delay` Instead, I'll create a 5-minute `timer` [16] for each camera by simply adding this to my `configuration.yaml`: => https://www.home-assistant.io/integrations/timer/ [16] `timer`
timer:
backyard_person:
duration: "00:05:00"
driveway_person:
duration: "00:05:00"
driveway_vehicle:
duration: "00:05:00"
east_front_person:
duration: "00:05:00"
east_rear_person:
duration: "00:05:00"
west_person:
duration: "00:05:00"
Back in the automation, I'll add a new `timers` variable set which will help to map the `binary_sensor` to the corresponding `timer` object. I can then append an action to start the timer, and a condition so that the automation will only fire if the timer for a given camera is not currently running. I'll also set the automation's `mode` to `single` (so that it will only run once at a time), and set the `max_exceeded` value to `silent` (so that multiple triggers won't raise any errors).
alias: Exterior Motion Alerts
description: ""
trigger:
- platform: state
entity_id:
- binary_sensor.backyard_person
- binary_sensor.driveway_person
- binary_sensor.driveway_vehicle
- binary_sensor.east_side_front_person
- binary_sensor.east_side_rear_person
- binary_sensor.west_side_person
from: "off"
to: "on"
condition: []
condition:
- condition: template
value_template: "{{ is_state(timers[trigger.to_state.entity_id], 'idle') }}"
action:
- service: camera.snapshot
target:
entity_id: "{{ cameras[trigger.to_state.entity_id] }}"
data:
filename: /media/snaps/motion.jpg
- service: notify.ntfy
data:
title: Motion detected!
message: "{{ trigger.to_state.attributes.friendly_name }}"
- service: shell_command.ntfy_put
data:
title: Motion detected!
message: "{{ trigger.to_state.attributes.friendly_name }}"
file: /media/snaps/motion.jpg
- service: timer.start
target:
entity_id: "{{ timers[trigger.to_state.entity_id] }}"
mode: single
max_exceeded: silent
variables:
cameras:
binary_sensor.backyard_person: camera.backyard_sub
binary_sensor.driveway_person: camera.driveway_sub
binary_sensor.driveway_vehicle: camera.driveway_sub
binary_sensor.east_side_front_person: camera.east_side_front_sub
binary_sensor.east_side_rear_person: camera.east_side_rear_sub
binary_sensor.west_side_person: camera.west_side_sub
timers:
binary_sensor.backyard_person: timer.backyard_person
binary_sensor.driveway_person: timer.driveway_person
binary_sensor.driveway_vehicle: timer.driveway_vehicle
binary_sensor.east_side_front_person: timer.east_front_person
binary_sensor.east_side_rear_person: timer.east_rear_person
binary_sensor.west_side_person: timer.west_person
That pretty much takes care of my needs for exterior motion alerts, and should keep me informed if someone is poking around my house (or, more frequently, making a delivery). ### Managing interior alerts I've got a few interior cameras which I'd like to monitor too, so I'll start by just copying the exterior automation and updating the entity IDs:
alias: Interior Motion Alerts
description: ""
trigger:
- platform: state
entity_id:
- binary_sensor.kitchen_back_door_person
- binary_sensor.garage_person
- binary_sensor.garage_vehicle
- binary_sensor.study_entryway_person
from: "off"
to: "on"
condition:
- condition: template
value_template: "{{ is_state(timers[trigger.to_state.entity_id], 'idle') }}"
action:
- service: camera.snapshot
target:
entity_id: "{{ cameras[trigger.to_state.entity_id] }}"
data:
filename: /media/snaps/motion.jpg
- service: shell_command.ntfy_put
data:
title: Motion detected!
message: "{{ trigger.to_state.attributes.friendly_name }}"
file: /media/snaps/motion.jpg
- service: timer.start
target:
entity_id: "{{ timers[trigger.to_state.entity_id] }}"
max_exceeded: silent
mode: single
variables:
cameras:
binary_sensor.kitchen_back_door_person: camera.kitchen_back_door_sub
binary_sensor.study_entryway_person: camera.study_entryway_sub
binary_sensor.garage_person: camera.garage_sub
binary_sensor.garage_vehicle: camera.garage_sub
timers:
binary_sensor.kitchen_back_door_person: timer.kitchen_person
binary_sensor.study_entryway_person: timer.study_person
binary_sensor.garage_person: timer.garage_person
binary_sensor.garage_vehicle: timer.garage_vehicle
But I don't typically want to get alerted by these cameras if my wife or I are home and awake. So I'll use the local calendar integration [17] to create a schedule for when the interior cameras should be active. Once that integration is enabled and the entity `calendar.interior_camera_schedule` created, I can navigate to the Calendar section of my Home Assistant interface to create the recurring calendar events (with the summary "On"). I'll basically be enabling notifications while we're sleeping and while we're at work, but disabling notifications while we're expected to be at home. => https://www.home-assistant.io/integrations/local_calendar [17] local calendar integration => schedule.png Image: calendar So then I'll just add another condition so that the automation will only fire during those calendar events:
alias: Interior Motion Alerts
description: ""
trigger:
- platform: state
entity_id:
- binary_sensor.kitchen_back_door_person
- binary_sensor.garage_person
- binary_sensor.garage_vehicle
- binary_sensor.study_entryway_person
from: "off"
to: "on"
condition:
- condition: template
value_template: "{{ is_state(timers[trigger.to_state.entity_id], 'idle') }}"
- condition: state
entity_id: calendar.interior_camera_schedule
state: "on"
action:
- service: camera.snapshot
target:
entity_id: "{{ cameras[trigger.to_state.entity_id] }}"
data:
filename: /media/snaps/motion.jpg
- service: shell_command.ntfy_put
data:
title: Motion detected!
message: "{{ trigger.to_state.attributes.friendly_name }}"
file: /media/snaps/motion.jpg
- service: timer.start
target:
entity_id: "{{ timers[trigger.to_state.entity_id] }}"
max_exceeded: silent
mode: single
variables:
cameras:
binary_sensor.kitchen_back_door_person: camera.kitchen_back_door_sub
binary_sensor.study_entryway_person: camera.study_entryway_sub
binary_sensor.garage_person: camera.garage_sub
binary_sensor.garage_vehicle: camera.garage_sub
timers:
binary_sensor.kitchen_back_door_person: timer.kitchen_person
binary_sensor.study_entryway_person: timer.study_person
binary_sensor.garage_person: timer.garage_person
binary_sensor.garage_vehicle: timer.garage_vehicle
I'd also like to ensure that the interior motion alerts are also activated whenever our Abode [18] security system is armed, regardless of what time that may be. That will make the condition a little bit trickier: alerts should be pushed if the timer isn't running AND the schedule is active OR the security system is armed (in either "Home" or "Away" mode). So here's what that will look like: => https://goabode.com/ [18] Abode
alias: Interior Motion Alerts
description: ""
trigger:
- platform: state
entity_id:
- binary_sensor.kitchen_back_door_person
- binary_sensor.garage_person
- binary_sensor.garage_vehicle
- binary_sensor.study_entryway_person
from: "off"
to: "on"
condition:
- condition: and
conditions:
- condition: template
value_template: "{{ is_state(timers[trigger.to_state.entity_id], 'idle') }}"
- condition: state
entity_id: calendar.interior_camera_schedule
state: "on"
- condition: template
value_template: "{{ is_state(timers[trigger.to_state.entity_id], 'idle') }}"
- condition: or
conditions:
- condition: state
entity_id: calendar.interior_camera_schedule
state: "on"
- condition: state
state: armed_away
entity_id: alarm_control_panel.abode_alarm
- condition: state
state: armed_home
entity_id: alarm_control_panel.abode_alarm
action:
- service: camera.snapshot
target:
entity_id: "{{ cameras[trigger.to_state.entity_id] }}"
data:
filename: /media/snaps/motion.jpg
- service: shell_command.ntfy_put
data:
title: Motion detected!
message: "{{ trigger.to_state.attributes.friendly_name }}"
file: /media/snaps/motion.jpg
- service: timer.start
target:
entity_id: "{{ timers[trigger.to_state.entity_id] }}"
max_exceeded: silent
mode: single
variables:
cameras:
binary_sensor.kitchen_back_door_person: camera.kitchen_back_door_sub
binary_sensor.study_entryway_person: camera.study_entryway_sub
binary_sensor.garage_person: camera.garage_sub
binary_sensor.garage_vehicle: camera.garage_sub
timers:
binary_sensor.kitchen_back_door_person: timer.kitchen_person
binary_sensor.study_entryway_person: timer.study_person
binary_sensor.garage_person: timer.garage_person
binary_sensor.garage_vehicle: timer.garage_vehicle
### Snooze or disable alerts We've got a lawn service that comes pretty regularly to take care of things, and I don't want to get constant alerts while they're doing things in the yard. Or maybe we stay up a little late one night and don't want to get pinged with interior alerts during that time. So I created a script to snooze all motion alerts for 30 minutes, simply by temporarily disabling the automations I just created:
alias: Snooze Motion Alerts
sequence:
- service: automation.turn_off
data:
stop_actions: true
target:
entity_id:
- automation.exterior_motion_alerts
- automation.interior_motion_alerts
- service: notify.ntfy
data:
title: Motion Snooze
message: Camera motion alerts are disabled for 30 minutes.
- delay:
hours: 0
minutes: 30
seconds: 0
milliseconds: 0
- service: automation.turn_on
data: {}
target:
entity_id:
- automation.interior_motion_alerts
- automation.exterior_motion_alerts
- service: notify.ntfy
data:
title: Motion Resume
message: Camera motion alerts are resumed.
mode: single
icon: mdi:alarm-snooze
I can then add that script to the camera dashboard in Home Assistant or pin it to the home controls on my Android phone for easy access. I'll also create another script for manually toggling interior alerts for when we're home at an odd time:
alias: Toggle Indoor Camera Alerts
sequence:
- service: automation.toggle
data: {}
target:
entity_id: automation.interior_motion_alerts
- service: notify.ntfy
data:
title: "Interior Camera Alerts "
message: "Alerts are {{ states('automation.interior_motion_alerts') }} "
mode: single
icon: mdi:cctv
### That's a wrap This was a fun little project which had me digging a bit deeper into Home Assistant than I had previously ventured, and I'm really happy with how things turned out. I definitely learned a ton in the process. I might explore adding action buttons to the notifications [19] to directly snooze alerts that way, but that will have to wait a bit as I'm out of tinkering time for now. => https://community.home-assistant.io/t/ntfy-sh-with-actions/578603 [19] adding action buttons to the notifications --- => mailto:blogreply.automating-camera-notifications-home-assistant-ntfy@runtimeterror.dev?subject=Re%3A%20Automating%20Security%20Camera%20Notifications%20With%20Home%20Assistant%20and%20Ntfy 📧 Reply by email ## Related articles => /display-tempest-weather-static-site/index.gmi Displaying Data from a Tempest Weather Station on a Static Site => /easy-push-notifications-with-ntfy/index.gmi Easy Push Notifications With ntfy.sh => /k8s-on-vsphere-node-template-with-packer/index.gmi K8s on vSphere: Building a Kubernetes Node Template With Packer --- => / Home => https://runtimeterror.dev/automating-camera-notifications-home-assistant-ntfy/ This page on the big web-- Response ended
-- Page fetched on Fri May 10 13:11:00 2024