-- Leo's gemini proxy
-- Connecting to gemini.tuxmachines.org:1965...
-- Connected
-- Sending request
-- Meta line: 20 text/gemini;lang=en-GB
Tux Machines
Posted by Roy Schestowitz on Dec 02, 2022
> Building a NAS box is one of the most popular things to do with a single-board computer, and this newly available carrier board from Radxa - known as the Taco (opens in new tab) - features plenty of SATA ports for you to connect hard drives too. Powered by a Raspberry Pi Compute Module 4 (opens in new tab) or a compatible board such as the Radxa CM3 (opens in new tab), it just needs a suitable case to make a fine storage device.
> Maker and Developer Abdullah Yıldırım, also known as Ronin, has created a custom LoRa module that works with one of our favorite microcontrollers, the Raspberry Pi Pico. This custom module also integrates with Arduino and introduces Wi-Fi connectivity with the help of an ESP8266.
> If you’re unfamiliar with LoRa (Long Range) devices, this is a type of wireless frequency that can be used for a variety of applications, including underwater communication. There are two different LoRa modules used in this project. Yıldırım designed one to use an RFM95 LoRa module and the other uses an RA-01 module. A Pico is connected to one along with a screen to display details about the communication status with the other LoRa setup.
> We’re well into the holiday season, and makers in the Raspberry Pi community are already making some beautiful holiday projects. Today we’ve got an amazing project to share from maker and developer Omantn. Using our favorite SBC, the Raspberry Pi, he’s created a way to automate his wife’s model Christmas village.
> According to Omantn, his wife has collected models for this Christmas village for a long time but never had a dedicated place to display them. So instead of fighting with cables and leaving them on a shelf, Omantn went the extra mile and created a Pi-powered solution. The project is built around a custom table with a system underneath that controls the lighting for the model’s LEDs.
> Now that we have things running properly in part 3, I figured I should work on the casing a bit. Especially since the current postal strikes in the UK mean that parts I have ordered are getting heavily delayed.
> [...]
> There are still a couple of minor issues to solve. The first is the IDE cable is a bit sensitive. If it gets knocked slightly the drives no longer exist. So I’m going to replace the cable. Also the CD-ROM drive is an old single-speed affair, it really struggles with some CDs that have even the slightest scratch on them. I therefore intend to upgrade this to a faster, more reliable drive.
> I have not dared try to clean the keyboard yet, I’m saving that for a few hours one weekend in the future due just how dirty it is. I have a simple PS/2 keyboard connected for now which works just fine with it.
-- Response ended
-- Page fetched on Fri Jun 14 04:35:41 2024