-- Leo's gemini proxy
-- Connecting to freeshell.de:1965...
-- Connected
-- Sending request
-- Meta line: 20 text/gemini;lang=en-GB
> Get and set SATA and IDE hard drive parameters.
Request the identification info of a given device:
sudo hdparm -I /dev/{device}
Get the Advanced Power Management level:
sudo hdparm -B /dev/{device}
Set the Advanced Power Management value (values 1-127 permit spin-down, and values 128-254 do not):
sudo hdparm -B {1} /dev/{device}
Display the device's current power mode status:
sudo hdparm -C /dev/{device}
Force a drive to immediately enter standby mode (usually causes a drive to spin down):
sudo hdparm -y /dev/{device}
Put the drive into idle (low-power) mode, also setting its standby timeout:
sudo hdparm -S {standby_timeout} {device}
> Copyright © 2014—present the tldr-pages team and contributors.
> This work is licensed under the Creative Commons Attribution 4.0 International License (CC-BY).
-- Response ended
-- Page fetched on Fri May 17 19:46:18 2024