-- Leo's gemini proxy
-- Connecting to darknesscode.xyz:1965...
-- Connected
-- Sending request
-- Meta line: 20 text/gemini;lang=en-US
After completed to flash the Raspbian Lite image to the SD card do the following:
With the SD card connected. In the root of the SD card create a new file named: **wpa_supplicant.conf**
In the file you should add something like this:
country=US
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev update_config=1
network={
ssid="YourNetworkSSID"
psk="Your Network's Passphrase"
key_mgmt=WPA-PSK
}
country should be your country code. Change if you are outside of US
ssid is the name of the WiFi network.
psk is the password of your WiFi Network
key_mgmt usually it’s WPA-PSK, can have other values like WPA-EAP, but you should be OK with WPA-PSK in most cases.
After you finish this steps your Raspberry Pi will automatically connect to your WiFi when you pop-in your SD card and power-up.
----------
----------
© DarknessCode
-- Response ended
-- Page fetched on Tue May 21 12:03:40 2024